4 Axis Mill Skill Builder

I really had no idea what to make.  For whatever reason I felt stumped this week.  So I made a really simple letter ‘J’ using the 4-axis mill.

Screen Shot 2016-04-06 at 11.05.24 AMI cut a piece of scrap plywood to size and used an 1/8″ flat bit.  The setup was smooth.  I added some tabs into the model in SRPlayer, knowing that I could just cut them or file them off later, since it’s just plywood.  I made the part nice and small so that it would be a quick job for my first time using this machine.

IMG_4318IMG_4324IMG_4325

Leave a Reply

Your email address will not be published. Required fields are marked *